A Successful Product Launch Formula

If you would like to profit from the information age you have come to the right place. In this article I am going to reveal to you how to create your own info product.

There has never been a better time in history to become an infopreneur. It really is not that difficult to become one, all you have to do is find a group of people with a unique problem and solve it.

The internet has created a flood of information that people in the past did not have access to. Unfortunately with so much information available it is some times difficult to navigate through it all and get to what you really are searching for.

This is where you come in by compiling information in an easy to read format and providing a solution people are willing to pay for. I will try to assist you in coming up with some ideas by asking you a few questions.

What area of your life would you like to improve?

Do you think there are other people that may be thinking the same thing?

Begin asking yourself questions until you touch on a subject that you feel other people may be struggling with as well.

It is really as simple as that, find a problem and then begin to look for a solution to it. The quality of your life is based on the quality of the questions you ask yourself.

Well, maybe it is a little harder than that but not impossible. Once you determine there is a market for your product, begin compiling all the solutions you can think of into an e-book.

It does not have to be ten volumes of notes it could be something as simple as a 70 page e-book. As long as it provides information that solves a problem for your readers.

So you have completed your info product but how much do you charge for it?

How do you market your product?

These are challenges many people face as they begin to tackle the challenge of creating their first info product.

But all is not lost, remember I mentioned earlier about finding a solution to a problem.

Clever Internet entrepreneur Jeff Walker has done just that. He has come out with a home study course called Product Launch Formula 2.0.

In the course Jeff covers many of the stumbling blocks you may encounter along the way to becoming a successful infopreneur. In fact many of his students have gone on to enjoy five to six figure launches.

I am sure that is the exception not the rule but it is quite encouraging. In closing I hope you now have enough information to get you started on your journey to becoming a successful infopreneur.

What Kind Of Things Can Cause Major Structural Damage To A Home?

Major structural damage to a home, such as that caused by flooding or a fire can be devastating. The costs of repairing this kind of damage are generally very high and it’s difficult to put a price on the stress involved with having your home reduced to rubble overnight. A pre-purchase building inspection can help you detect any underlying problems like subsidence, dry rot or woodworm infestation which may not present themselves until after moving day (or even during occupancy). These kinds of conditions will cause serious health risks if ignored and can also cause irreparable damage to the structure of the house; make sure you understand everything about your potential dream house before signing away your hard-earned money.

Some things that can cause structural issues in a home include:

A roof leak – A leaking roof is a common cause of structural damage to homes. This may be caused by any number of factors, including faulty installation or the natural wear and tear that comes with age. Leaks can also arise from damaged shingles (which are often found in older buildings), poor roof design allowing water into places where it shouldn’t go through, or old gutters that need cleaning out. A leaking roof is one major problem which causes serious flaws within your home structure over time. A fault in the installation itself due to inexperience will always play its part but once it has happened there’s no going back; something must be done about it before further damage occurs if you want your house not to be reduced to rubble overnight.

Damaged foundation – The foundation of a home is an integral part of it structure and any damage to it will need immediate attention. If you’re thinking about buying a home then checking the foundation is something that should be on your to do list before signing any contracts, because once it becomes apparent that there are issues with the foundation of your dream house, chances are they won’t go away for anything less than thousands in repairs which could have been avoided if detected early enough. It’s very easy to see evidence of foundation damage when you look at damaged walls or floors but also take note whether these areas show signs of moisture. The cracks themselves can tell their own story too so don’t dismiss them as unimportant; water seeping through means more problems ahead unless tackled head-on while still small and manageable rather than left alone until they become worse. Damages to a home’s foundation can occur from a number of sources including weather, animals, as well as faulty construction.

Cracks in the walls or floors – Cracks in the walls or floors can mean bigger problems down the road. Even a small crack is an indicator of bigger issues which is why you need to hire an inspector before purchasing your dream home so he or she can identify these kinds of structural damage and help make sure they are rectified properly. Cracks in walls, floors or ceilings should be reported immediately even though some cracks may not seem like much at first glance because over time they will only get worse if left alone. Look out for signs that water might be seeping through as this can mean major leakages elsewhere on the property which indicate further more serious damage to find with proper inspection by professionals who know what they’re doing when it comes to identifying non-visible structural damage on homes.

Leaky pipes and poor insulation – Leaky plumbing and poor insulation can cause severe structural damage in the form of mould growth and rot throughout the house. Mould can cause serious health issues, especially for people with allergies or respiratory conditions so make sure any leaks are fixed immediately if you notice them before buying a property! Once mould has taken hold in your home there is no going back as this will require expensive remediation work. Mould eats away at building materials which leads to rotting wood beams, floors and walls over time until they completely give way under their own weight leaving an unsafe environment for anyone wanting live there.

Holes in the wall, ceiling, or flooring – These can mean many problems, including a costly repair bill, a dangerous environment for anyone living there, and the potential loss of personal property. If you notice any holes in your home’s walls ceilings or floors it is essential to get them fixed straight away as this can cause further significant damage if left undetected, such as mould growth which will lead to major restoration work that could possibly be very expensive depending on how much remediation needs doing before repairs can begin. If you have an air tight house with little ventilation then moisture build-up from even small amounts of damp/water leakage through these holes may also create serious problems like wood rot and drywall corrosion (which eats into plasterboard) until eventually rotting beams or floor joists start giving way under their own weight.

Outdated electrical system – If you have any outdated electrical systems in the home, this is a very dangerous problem to have, as it could cause a fire, which is a serious safety hazard for the occupants. One way to detect such problems is by having a home inspection done.

As you can see, before you make a decision to buy any property it is essential that you get an inspection done. That simple pre-purchase inspection report in Sydney issued by a professional inspector or company, can save you the investment you make on your new home, and hassle of problems of later on.

Microsoft Great Plains Beverage Production & Distribution – Implementation & Customization Highlight

Microsoft Business Solutions Great Plains has many years of successful implementation in multiple horizontal markets. In today’s small article we’ll share our experience of implementing and customizing Microsoft Great Plains, formerly Great Plains eEnterprise/Dynamics in beverage production and distribution industries. These examples will cover two scenarios: US regional distribution and International fruit punch production and sales in US, Latin America and Europe. We’ll try to be industry specific and at the same time technical – using Microsoft Great Plains technical & customization terminology to address both – decision makers and technical consultant / programmer.o Concentrate and Output. Usually company sells concentrate to small and mid-size production facilities, where fruit punch or soda is produced and company control the produced volume in Gallons or Liters. In Great Plains you should have light production customization, the natural way is to build it upon Bill of Materials (BM) module. This production is very simple – you put some labor units and portion of concentrate or powder to produce one Gallon / Liter of punch/soda.o Marketing Reports. Beverage produces are fiercely competing with each other for the market share. In the case of fruit punch or soda – competition moves to emerging markets, such as East Europe or Latin / South America. Company has to control sales dynamics via monthly marketing reports, where marketing people can compare sales comparing to the same period of the last year. You have two options – first is to create data warehouse on SOP30200 and SOP30300 tables (Great Plains Sales Order Processing module) using MS SQL Server Datawarehousing, Cognos or other datamining tool and second – use set of Crystal Reports. Datawarehousing approach requires user training and might be a bit less precise, Crystal Reports are very precise – but might be less flexible.o EDI. Electronic Document Interchange – in the case of US regional beverage distributor/wholesaler (beer, wine, soda, strong lemonade), we usually see UNIX ordering system, working with EDI orders. In this case Great Plains has to be integrated with this IBM AS/400/RS6000 box and as company manager you should be looking for Microsoft Business Solutions VAR/Partner, who has experience dealing with multiple platforms: UNIX/Linux/Windows/Oracle/Sun Solariso Advertisement Expense Allocation. Beverage producer usually launches TV ads on local markets, especially difficult is to track ads efficiency on the emerging markets: Central America, Caribbean, Africa, South East Asia, Russia. You need to establish variable or fixed allocation accounts mechanisms for ads expense trackingGood luck with implementation, customization and integration and if you have issues or concerns – we are here to help! If you want us to do the job – give us a call 866-528-0577 or 630-961-5918! [email protected]